Accessibility
204
Accessibility
TactileWarning Studs
Reference
Material
Packing
Spec.
Type
Price
excl. VAT
4360
Stainless Steel
Pack of 200 studs.
For approx.1.30 m x 0.40 m
Standard chevron-patterned head, anti-slip, Ø 25 mm, total height 20 mm.
Coefficient of friction on wet floor = 0.53 (min. required value 0.25).
Use Ø 10 mm drilling template (ref 4366) and drill Ø 10 mm (ref 4368).
To be
sealed
METAL STUDS - TO BE SEALED
OUTDOOR
CHEVRON-PATTERNED «METACLOU»
With plug
A2 tactile stainless steel studs for indoor and outdoor use. Use
of a drilling template is highly recommended for a time-saving
and standardized installation. Studs can be installed in two ways
depending on floor type:
• On hard floors (granite, marble, concrete...)
Installation with plugs. Drill a hole 30 mm deep into the support
using a Ø 11 mm drill for concrete. Place the plug on the stud
and hammer them in using a rubber mallet.
•
On semi-consistent floors (asphalt, exposed aggregate
concrete)
Installation without plugs.
Drill a hole 25 mm deep into the support using a ø 10 mm drill for concrete. Use a two-component
sealing resin and insert the stud.
•
On wood,
installation without plugs.
Use a wood - metal neoprene adhesive for outdoor use, and insert the stud.
Without plug
Chemical fixing or
installation with plugs.
FLUTED «METACLOU»
Stainless steel
Brass
Zinc-plated steel
Black plated steel
FLAT «MÉTACLOU»
316 stainless steel stud, flat, anti-slip dia-
mond effect.
25 mm dia. x 5 mm thick. 12 mm x 6 mm
dia. shank. Use template ref. 4366 and
an 8 mm drill. Chemical sealant fixing.
Podotactile studs in PA6 polyamide -
60 shore D, can be used both indoors
and outdoor for frequent and heavy
traffic. Very good UV resistance. chemical
sealant resin fixing ref 93017.
Reference
Material
Packing
Type
Price
excl. VAT
4361
Stainless steel
316L
Pack of 200 studs.
For approx. 1.30 x 0.40 m
To be
sealed
RIBBED «POLYCLOU»
Reference
Material
Packing
Type
Price
excl. VAT
4432
Black
polyamide
Kit of 200 studs
+ 1 paper template for
drilling 10mm holes. For
approximately 1.30 x 0.40 m.
To be
sealed
4433
Grey
polyamide
ACCESSORIES FOR METACLOU
Reference
Description
Spec.
Price excl.
VAT
4366
Metal drilling template Ø 10 mm
For studs with sealing resin. Dim: 600 x 420 mm.
4367
Metal drilling template Ø 11 mm
For studs with plugs. Dim: 600 x 420 mm.
4368
Drill Ø 10 mm x 160 mm
4369
Drill Ø 11 mm x 160 mm
4362
Pack of 200 plugs/ 4360
Special PA6 polyamide plugs, for outdoors. To be ordered
separately. Use Ø 11 mm drilling template and drill Ø 11
mm (ref 4367 et 4369).
93017
Chemical sealant
Allow about 1 cartridge for 200 studs.
93057
Caulking gun
420
600
4366
4367
93017
93057
Reference
Material
Packing
Spec.
Type
Price excl.
VAT
4355
Stainless steel
Pack of 216 studs.
For approx.
1.20 x 0.60 m
Passivated A2-304 stainless steel studs for maximal corrosion protection. Particularly
recommended for seaside and coastal areas
To be
sealed
4351
Zinc-plated steel
Low budget multi-purpose zinc-plated steel studs with high corrosion protection (400h red
rust in BS test).
4352
Black plated steel
Low budget multi-purpose zinc-plated steel studs with high corrosion protection (400h red
rust in BS test). Black zinc coating gives an old-looking, timeless aspect.
4357
Brass
Over time, it acquires a grey-green patina, in perfect harmony with historical buildings
(churches, castles…)
4353
Zinc-plated steel
RAL colours
Minimum order:
500 studs
Stud in zinc-plated steel with thermo-lacquered coloured coating giving a decorative finish
to an often austere tactile device and offering an additional visual contrast.
Specify the desired RAL shade (custom manufacturing with a minimum order of 500 studs).
Not recommended in places with heavy traffic.
Complies with
Accessibility
Standard
